These Impulse resistors are used with impulse generators of any design for wave shaping purpose. The non-inductive, Nichrome wire wound resistors are best suitable for Lightning, switching & current impulse waves shaping application. These resistors can be fixed in impulse generator to get required front and tail time of the waves. These resistors are suitable for indoor impulse generators and can be used as front (series), Tail (Parallel), output damping resistor with taps and Trigger resistors used in multiple chopping gaps. The flat and circular shape impulse resistors are available. We are designing and manufacturing various ratings of customized impulse resistors.

We also design and manufacturing DC Charging,Current limiting and Grounding resistors.

 

SPECIFICATIONS

• Ohmic values ranging from 1 ohms to 10M ohms
• Impulse voltage ranging from 1kV to 1MV
• Impulse energy ranging from 1kJ to 300kJ
• Tolerance range 1%, 2%, 3%, 4% & 5%
• Shape: Flat and Circular

 

Ordering Information

• To meet the technical specification and dimensional requirements, the following information are required.
• Application of the resistor: Wave shaping, DC Charging, Grounding, Current Limiting (AC Voltage), etc.
• Wave shape specification: Lightning impulse, Switching impulse, Current impulse, DC, AC Power frequency, etc.
• Resistance Value
• Operating Voltage
• Impulse energy in kilo Joules and time between the two impulses and duty cycle
• Continuous power in watts for AC & DC application
• Operating Medium: Air, Oil
• Proposed dimensional drawing and limitations, Shape (Flat or Circular), Terminal specification.